Skip to content

USB-C Protection Cases for AirPods - Installation Guide

(last updated on 09.10.24)

This guide works for any generation of AirPods.

Ok, let’s get started. It's very easy. You first start by inserting the bottom part while making sure the buttons are on the same side. It should slide in easily and click in the place near the end of the insertion. If you feel some resistance near the end of the insertion, slide the AirPods case out and check that the Lightning port is straight at the bottom of the protection case.

Bottom Part Insertion

Figure 1. Bottom Part Insertion

Now use the provided alcohol pad to clean the outside of the top lid of your AirPods.

Alcohol Pad Cleaning

Figure 2. Alcohol Pad Cleaning

Remove the longer brown paper on the provided sticker and apply the sticker in the middle of the top lid of your AirPods.

Placing the sticker

Figure 3. Placing the sticker

Remove the dark yellow paper on the sticker to expose the sticky side.

Exposing the second sticker side

Figure 4. Exposing the second sticker side

Align the front of top part of the protection case with the front of the bottom part and rotate the part in place while holding the front together.

Top Part Alignment

Figure 5. Top Part Alignment

Press on the down on the top of the top protection case to make sure the sticker bonds correctly. I recommend holding 30 seconds.

You did it!! Congrats :) Because you bought from my shop, you gained writing access to my Discord server with the link inside your order confirmation email. Please post a picture of your final result! You can also tweet it at me if you'd like. I would really appreciate it and will definitely congratulate you again.